Heavy-duty, budget-friendly off-grid power you can trust. This GIANDEL 2000W modified sine wave inverter efficiently converts 12V DC battery power into robust 120V AC electricity. Engineered for high-demand practical loads, it delivers 2000W of continuous power and a 4000W surge peak, making it an absolute workhorse for RVs, overlanding trucks, campsites, garage tasks, and emergency home backup. Equipped with dual standard AC outlets and a high-speed USB port, it provides a straightforward, cost-effective power solution for your essential everyday devices.
(Note: This is a Modified Sine Wave inverter designed for resistive loads; sensitive electronics, medical gear, or induction cooktops may require a pure sine wave model).
ETL Certified Safety: Fully tested and ETL listed under strict UL 458 safety standards for vehicle, marine, and RV electrical environments.
Universal 12V Battery Compatibility: Deeply optimized to work flawlessly with Lithium (LiFePO4), AGM, Deep Cycle, Gel, and standard Lead-Acid batteries.
2000W Continuous / 4000W Peak: Exceptional startup capacity tailored for power tools, lights, fans, small refrigerators, and chargers.
15ft Wired Remote Control: Easily manage your system from a distance—perfect for hidden installations inside equipment bays or under truck seats.
Rugged Aluminum Armor: Heavy-duty aluminum alloy housing protects vital internal components from bumps and drops while optimizing heat dissipation.
Built for flexible off-grid integration. Unlike basic inverters that struggle with modern battery chemistry, this model features advanced internal circuitry that safely matches the voltage curves of Lithium and LiFePO4 battery banks, alongside traditional deep-cycle setups. (We recommend a 200Ah or larger battery system for optimal runtime). To guarantee absolute safety, it utilizes soft-start technology and an isolated input/output architecture to deliver comprehensive defense against overvoltage, undervoltage, overcurrent, overloading, overheating, and short circuits.
Continuous Power Output: 2000W Rated
Surge Power Capacity: 4000W Peak
Output Waveform: Modified Sine Wave
Maximum Efficiency: 90%
Nominal Input Voltage: 12V DC (9.8V – 16V DC)
Nominal Output Voltage Range: 110V – 120V AC
AC Outlets: 2 × Standard US 3-Prong Outlets
USB Output Port: 1 × DC 5V / 2.4A (Max)
Wired Remote Controller: Includes 15ft cable for seamless ON/OFF distance control
Internal Fuses: 30A
Included Battery Cables: 1 × Pair of heavy-duty 2ft cables
Status Dashboard: Integrated LED indicators for active performance tracking
Testing Voltage: Because this is a Modified Sine Wave inverter, you must use a True RMS multimeter to get an accurate AC output voltage reading. Standard multimeters will display an incorrect low voltage.
Battery Setup: Connect the inverter to your 12V battery using the standard heavy-duty cables provided before plugging in your AC devices. Always disconnect the positive (+) battery terminal before modifying any wiring.
Vehicle Battery Care: To prevent unwanted car battery drain, do not leave the power inverter in the "ON" position while your vehicle's engine is turned off.
Storage Environment: Keep the unit in a cool, dry, and well-ventilated space. Avoid placing it under direct sunlight.
Know Your Wattage: Do not use this inverter with any appliance that draws a higher wattage than the 2000W continuous limit, as this may cause permanent damage to both devices.
1 × GIANDEL 2000W Power Inverter
1 × Pair of Heavy-Duty Battery Cables
1 × Wired Remote Controller with 15ft Cable
8 × Heavy-Duty Shockproof Pads
1 × Shockproof Pads Installation Guide
1 × User Manual