The used 5000W inverter offers a lower-cost way to run high-wattage basic AC loads from a 12V battery system. This used product may show small cosmetic imperfections on the top, front, or sides, while normal working function has been tested before resale. It provides 5000W continuous modified sine wave output, making it suitable for compatible tools, lighting, charging equipment, garage devices, RV appliances, and other non-sensitive loads within the rated range.
This model includes four AC outlets, one hardwire terminal block, an LCD display, two USB charging ports, a remote controller, and four pairs of cables. The hardwire terminal supports larger connected loads from 1500W to 5000W when the battery bank, wiring, and installation match product requirements. A 500Ah or larger 12V battery group helps support longer operation with heavy loads.
This inverter suits basic high-load equipment rather than waveform-sensitive appliances. It does not power induction ovens due to compatibility limits, and users should confirm appliance type and startup demand before connecting devices. The LCD screen makes daily checking easier by showing voltage and protection information without opening the full installation area.
Safety support includes isolated input and output design, low-interference technology, and protection against over voltage, low voltage, overload, short circuit, and overheating. AIG product liability coverage adds another layer of purchase confidence for used equipment.
For larger 12V battery systems, the used 5000W inverter brings high continuous output, hardwire connection support, LCD feedback, and remote operation at a lower starting cost. It fits workshops, RV power builds, emergency lighting, garage equipment, and heavy basic loads that do not require pure sine wave output.
Specifications:
• Output wave: Modified sine wave
• Power (4xAC Outlets): 5000W Rated(Over load protection power 5001-5500 watt)
• USB output: 2xDC 5V/2.4A(max)
• Rated input Voltage: 12VDC
• Nominal input voltage:9.8-16VDC
• Nominal output voltage:AC 120+/-10% V
• Idle current: Max 3.5 Amps (Around 42 Watt)
• With LCD display to view input volt,output volt,battery level,etc
• Internal fuses:20x30A
• Battery cables:4 pairs with length of 2 ft
• Remote controller: remote controller with 15ft cable. More convenient to control the inverter ON/OFF
•The inverter Switch is long press type,please press it 1-2 second to turn it on or off.
More details and tips:
• This is a Modified Sine Wave inverter, only True RMS meter can correctly test out the AC voltage.
• Connect the inverter to 12V battery only, and plug your 120V AC devices into the inverter
• Please use the standard cables we provide with product.
• Please do not leave the power inverter in the ON position while your car is off.
• Disconnect the positive battery terminal before doing any wiring to the inverter
• Do not put the inverter into sunlight directly, keep it in cool and dry environment
• Don’t use the inverter with a product that draws a higher wattage the inverter can provide,as this may cause damage to the inverter and product