The 2000W pure sine wave inverter with GFCI converts 12V DC battery power into 110V–120V AC output for RVs, cars, vessels, emergency backup, and sensitive equipment under the rated load. Its dual UL-certified GFCI outlets add ground fault circuit interrupter protection, helping reduce leakage-related risk when the system is installed and grounded correctly. Pure sine wave output supports computers, hair dryers, microwaves, and other compatible appliances that need cleaner AC power.
2000W Inverter With LCD Display And Remote Control
This model includes a large LCD display, a 15-foot wired remote, dual fast USB charging ports, and dual GFCI outlets. The LCD display shows input voltage, output wattage, battery status, and protection codes when the inverter enters protection mode. The remote gives users convenient on/off control when the inverter sits near the battery or in a storage space.
2000W continuous pure sine wave output from 12V batteries
Dual UL-certified GFCI outlets for leakage protection
Large LCD display for battery, load, and protection status
Dual 2.4A USB ports for phones, tablets, cameras, and laptops
15-foot wired remote for easier operation from another location
Giandel adds input and output isolated design with protection against high input, low input, overload, overheating, and short circuit. FCC certification also supports use around radio-related appliances where electrical interference may matter.
The aluminum housing helps protect the inverter from drops and bumps while supporting heat release during operation. Users should match total appliance load with the 2000W rating and check startup power before running motor-driven or heating equipment. The GFCI outlets give this model a safety-focused advantage for vehicle, vessel, and backup systems.
For Canadian orders and 12V battery setups, the 2000W pure sine wave inverter with GFCI provides cleaner AC power, outlet-level ground fault protection, clear LCD monitoring, and practical remote control. It fits users who want a safer outlet design for backup power, mobile systems, and sensitive household devices.
SPECIFICATIONS:
Power(Dual GFCI Sockets): 2000W Rated Power
Output Waveform:Pure Sine Wave
THD< 3%
Input Voltage: 12VDC
Output Voltage: 110-120 VAC ±10%
Idle Current: About 2.2 amps
Efficiency: up to 90%
LCD Display: Easily to know input voltage, using output wattage, battery status, and protection code
Remote Controller with 15ft cable
Built-in intelligent cooling fan: Run automatically when the temp reaches 104℉ or load power is more than 40% of rated power.
Over-load Protection: 2000w ~ 2400w
Over-temperature Protection: Around 149℉
Working Temperature: -22℉ ~ 140℉
Over-voltage Shutdown: 16V±0.5VDC
Under-voltage Alarm: 9.8V±0.5VDC
Under-voltage Shutdown: 9.5V±0.5VDC
ATTENTION:
Connect inverter to 12V 400 Ah above battery with the provided cables, then plug your AC devices into the inverter. DO NOT exceed 2000 Watt.
Please do not leave the power inverter in the ON position while your car is off.
Disconnect the positive battery terminal before doing any wiring to the inverter.
Do not put the inverter into sunlight directly, keep it in cool and dry environment.
Don’t use the inverter with a product that draws a higher wattage the inverter can provide, as this may cause damage to the inverter and product.
