Upgrade your off-grid power with more capacity and exceptional value. This GIANDEL 1600W modified sine wave inverter efficiently converts 12V DC battery power into stable, reliable 120V AC electricity for your everyday needs. Purpose-built to offer more power headroom than standard 1500W units, it delivers 1600W of continuous output to comfortably run appliances within its rated range. Perfect for RVs, overland trucks, family camping, garages, and small solar setups, this multi-plug hub keeps your essential electronics up and running whenever grid power is out of reach.
(Note: This is a Modified Sine Wave inverter designed for resistive loads; high-precision sensitive electronics or inductive equipment may require a pure sine wave model).
1600W Continuous Output: Provides extra power capacity over traditional 1500W models to safely run everyday AC devices.
Dual 120V AC Outlets: Features dual standard US 3-prong sockets—no power strips or messy extension cords required.
15ft Wired Remote Control: Effortlessly manage your power source from a distance, keeping your main battery setup neatly tucked away.
Smart LED Fault Dashboard: Instant on-screen error codes (such as HI, OL, OH) allow you to identify high voltage, overload, or overheating conditions at a glance.
Intelligent Thermal Defense: The integrated high-speed cooling fan activates automatically only when internal temperatures exceed 104°F, saving precious battery juice under lighter loads.
Continuous Power Output: 1600 Watts Rated
Output Waveform: Modified Sine Wave
Maximum Efficiency: 90%
Idle Current Draw (No Load): Max 1.0 Amp
Nominal Input Voltage Range: 12V DC (9.8V – 16V DC)
Nominal Output Voltage Range: 110V – 120V AC
AC Connections: 2 × Standard US 3-Prong Outlets
USB Output Port: 1 × DC 5V / 2.4A (Max) for phones and tablets
Wired Remote Controller: Includes 15ft cable for seamless distance ON/OFF control
Internal Fuses: 30A
Included Battery Cables: 1 × Pair of heavy-duty 2ft cables
Smart Dashboard: Integrated LED indicators for active fault-protection tracking
Overload Protection Threshold: Activates between 1601W – 1800W
Low Input Voltage Alarm: 9.8V ± 0.3V
Low Input Voltage Protection: 9.5V ± 0.5V (Screen displays "LO")
Overtemperature Shutdown: 149°F (65°C)
Comprehensive Suite: Armed against overvoltage, undervoltage, overcurrent, overloading, short circuits, and overheating.
Testing Output Voltage: Because this is a Modified Sine Wave inverter, you must use a True RMS multimeter to get an accurate AC output voltage reading. Standard multimeters will read incorrectly low.
Wiring & Installation: Connect the inverter to your 12V battery using the standard heavy-duty cables provided before plugging in any AC appliances. Always disconnect the positive (+) battery terminal before modifying any wiring.
Vehicle Battery Care: To prevent unwanted vehicle battery drain, do not leave the power inverter in the "ON" position while your engine is turned off.
Storage Environment: Keep the unit in a cool, dry, and well-ventilated environment. Avoid placing it under direct sunlight.
Know Your Wattage: Do not use this inverter with any appliance that draws a higher continuous wattage than the 1600W limit, as this may cause permanent damage to both devices.
1 × GIANDEL 1600W Power Inverter
1 × Pair of Heavy-Duty Battery Cables
1 × Wired Remote Controller with 15ft Cable
1 × User Manual & Troubleshooting Guide