Heavy-Duty 12V Power For Emergency Load Support
The used 4000W heavy duty inverter is built for larger 12V backup systems that need strong pure sine wave AC output during outages, storms, RV use, marine power, and solar battery operation. This used unit may have small cosmetic marks, while tested function remains the core value. It provides 4000W continuous output and 8000W peak power, giving compatible appliances stronger startup support within the rated range.
High-Peak Inverter With Hardwire Terminal Output
This model includes four AC outlets, one hardwire terminal block for 1500W–4000W loads, one USB port, LED display, three pairs of 4 AWG cables, one meter of ground wire, and shockproof pads. The hardwire terminal gives higher-load appliances a more suitable connection path when installation follows the manual.
- Tested used 4000W pure sine wave output
- 8000W peak power for short startup demand
- Four AC outlets plus hardwire terminal block
- LED display for quick working status checks
- Cables, ground wire, and shockproof pads included
This product’s positioning differs from a standard 4000W page by focusing on emergency readiness and peak-power support. It can serve larger appliances during hurricanes, storms, power outages, boat use, RV stays, and off-grid conditions when the battery bank and connected load match the inverter requirements.
Protection features include high voltage, low voltage, overload, short circuit, overheating, and reverse polarity protection. ETL listing under UL458 and AIG product coverage support safer use when the inverter is correctly installed and grounded.
For high-capacity 12V backup projects, the used 4000W heavy duty inverter gives users tested output, 8000W startup support, hardwire flexibility, and included installation accessories. It fits systems where short surge demand and emergency load handling matter more than small-device convenience.
Specifications:
- Output wave: pure sine wave
- Power (4 AC Outlets): 4000W Rated, 8000Wpeak
- USB output: 1xDC 5V/2.4A(max)
- THD<3%
- Efficiency 90%
- Nominal input voltage:9.8-16VDC
- Nominal output voltage: 110-125VAC
- Internal fuses:8*30A
- Battery cables:4 pairs with length of 2 ft
- Remote controller: remote controller with 30ft cable. More convenient to control the inverter ON/OFF
- LED display: voltage,current,power display More details and tips: Read the manual before using or while you have any query
- connect the inverter to a 12V battery with our standard battery cables, and plug your AC devices into the inverter
- Please do not leave the power inverter in the ON position while your car is off.
- Disconnect the positive battery terminal before doing any wiring to the inverter
- Do not put the inverter into sunlight directly, keep it in cool and dry environment
- Don’t use the inverter with a product that draws a higher wattage the inverter can provide,as this may cause damage to the inverter and product
