What is the difference between sine wave inverter and ordinary inverter

Pure sine wave inverters have strict functional parameters and high price, and are used in electronic circuits that require high waveform parameters. The ordinary inverter is a hybrid waveform of sine wave, square wave, clutter and other components, which can be used for general electrical appliances, and the price is low. 

1. Sine wave inverter input circuit

The input of the inverter is usually direct current, or direct current obtained by rectifying and filtering the mains. These direct currents include direct current from the DC grid, batteries, photovoltaic cells and other methods. Usually, these electrical energy cannot be directly used as the voltage on the input side of the inverter. It is used as the input of the inverter after passing through a certain filter circuit and EMC circuit.

2. Inverter main circuit

The main circuit of the inverter is a power conversion circuit composed of power switching devices. The main circuit has many structural forms. Under different input and output conditions, the main circuit forms are also different. Each power conversion circuit has its own advantages and disadvantages. , the most suitable circuit topology should be considered as the main circuit structure in the actual design.

3. Control circuit

According to the requirements of the inverter output, the control circuit generates one or more sets of pulse voltages through a certain control technology, and acts on the power switch tube through the drive circuit, so that the power switch tube is turned on or off according to the specified order, and finally the main power switch is turned on or off. The desired voltage waveform is obtained at the output of the circuit. The function of the control circuit is very important for the inverter system, and the performance of the control circuit directly determines the quality of the output voltage waveform of the inverter.

4. Output circuit

The output circuit generally includes an output filter circuit and an EMC circuit. If the output is DC, a rectifier circuit should be added later. For an inverter with isolated output, an isolation transformer should also be provided in the front stage of the output circuit. According to whether the output needs a voltage regulator circuit, the output circuit can be divided into open-loop and closed-loop control. The output of the open-loop system is only determined by the control circuit, while the output of the closed-loop system is also affected by the feedback loop, making the output more stable.

5. Auxiliary power supply

Some parts or chips of the control circuit and the input and output circuit have specific input voltage requirements, and the auxiliary power supply can meet the specific voltage requirements in the circuit. Usually, the auxiliary power supply is composed of one or several DC-DC converters. For the case of AC input, the auxiliary power supply is completed by combining the rectified voltage and the DC-DC converter.

6. Protection circuit

Protection circuits usually include input overvoltage, undervoltage protection, output overvoltage, undervoltage protection, overload protection, overcurrent and short circuit protection. There are other protections for inverters working in specific occasions, such as temperature protection in very low or very high temperature situations, air pressure protection in case of certain air pressure changes, and air pressure protection in humid environments. Humidity protection, etc.

 

You are welcome to know about our Giandel inverter at any time: www.giandel.com

Popular products

Featured product