Upgrade your 24V power system with premium efficiency and clean energy. This GIANDEL 1200W pure sine wave inverter is purpose-built to convert 24V DC battery power into stable 120V AC electricity, achieving an impressive 91% maximum efficiency. Offering 1200W of continuous power and a 2400W peak, this model provides more usable capacity and headroom than standard 1000W units. Boasting an ultra-low THD (≤3%), it delivers the pristine current required to run refrigerators, freezers, laptops, air compressors, and sensitive devices smoothly and safely.
Engineered for 24V Systems: Higher efficiency, lower current draw, and less heat buildup—ideal for 24V small solar setups, trucks, and off-grid cabins.
Max 91% Power Conversion: Advanced engineering minimizes energy loss, squeezing more runtime out of your 24V battery bank.
True Pure Sine Wave (THD ≤3%): Utility-grade, buzz-free power that extends the lifespan of motors, fans, and delicate electronics.
Smart LED Status Monitor: Convenient digital dashboard tracks active battery voltage, output wattage, and safety protection statuses.
15ft Wired Remote Control: Easily switch the inverter ON/OFF from a distance, allowing for a clean installation inside storage compartments.
Designed for smart power management. By utilizing a 24V input architecture, this inverter reduces cable current demands, making it a highly reliable centerpiece for small solar layouts and recreational vehicles. Enclosed in a rugged aluminum alloy housing, the unit features an intelligent cooling fan that activates only when needed to prevent unnecessary battery drain. With built-in soft-start technology and an isolated input/output design, it safely handles startup loads for light-to-medium appliances without system strain.
Continuous Output Power: 1200 Watts (True Pure Sine Wave)
Surge Power Capacity: 2400 Watts Peak
Maximum System Efficiency: 91% (THD ≤ 3%)
Output Waveform / Frequency: Pure Sine Wave / 60Hz ± 0.5Hz
Nominal Input Voltage Range: 24V DC (19V – 32V DC)
Nominal Output Voltage Range: 110V – 120V AC
AC Outlets: 2 × Standard US 3-Prong Outlets
USB Output Port: 1 × DC 5V / 2.4A (Max)
Idle Current Draw (No Load): 0.5 Amps
Included Battery Cables: 1 × Pair of 8AWG Cables (Length: 2 ft)
Internal Fuses: 30A
Input Overvoltage Shutdown: 32V DC ± 0.5V
Input Undervoltage Shutdown: 19V DC ± 0.5V
Input Undervoltage Alarm: 19.6V DC ± 0.3V
Overtemperature Protection: 149°F ± 9°F (65°C ± 5°C)
Overload Protection Threshold: 1300W
24V System Only: This inverter requires a 24V battery system (battery bank configured to 24V). It will not operate on, and may damage, standard 12V vehicle battery setups.
Recommended Capacity: For optimal runtime and performance, we recommend connecting to a 100Ah or larger 24V battery bank.
Wiring Safety: Always use the standard 8AWG heavy-duty cables provided. Disconnect the positive (+) battery terminal before performing any wiring adjustments.
Vehicle Care: To prevent unwanted battery drain, do not leave the power inverter in the "ON" position while your vehicle's engine or solar charge controller is turned off.
Optimal Environment: Keep the inverter in a cool, dry, and well-ventilated space. Avoid placing it under direct sunlight.
Know Your Wattage: Do not use this inverter with any appliance that draws a higher wattage than the 1200W continuous limit, as this may cause permanent damage to both devices.
1 × GIANDEL 1200W 24V Pure Sine Wave Power Inverter
1 × Pair of 8AWG Battery Cables
1 × Wired Remote Controller with 15ft Cable
1 × User Manual
8 × Heavy-Duty Shockproof Pads (with Shockproof Installation Guide)