【FOR USA】Used - Very Good Power Inverter 2200W 12V DC to 110 120V AC ETL Approved

Tested Pure Sine Wave Output For 12V Backup Systems

The used 2200W power inverter supplies 2200W continuous pure sine wave output from a 12V battery system, giving users more capacity than many 2000W models at a lower upfront cost. This used unit may have small cosmetic imperfections on the top, front, or sides, while working function has been tested before resale. It includes dual AC outlets, one USB port, LED display, 15-foot remote control, and a 20-amp hardwire terminal block for heavier appliance connections.

Low THD Inverter With Pure Copper Battery Cables

This model focuses on cleaner current and stronger wiring support. Its THD is around 3%, helping compatible appliances under 2200W run with smoother power. The included pure copper cable is 2 feet long and 35 mm² thick, giving the inverter a solid connection path for higher-current use when installed correctly.

• Tested used 2200W pure sine wave output
• 20-amp hardwire terminal block for heavier loads
• Low THD around 3% for cleaner AC output
• LED display for input voltage, output power, and protection modes
• Pure copper battery cable and 15-foot remote included

Safety features include isolated input and output design, soft start technology, and protection against over voltage, low voltage, overload, short circuit, overheating, and reverse polarity. ETL listing with UL458 standard support adds confidence for 12V backup, RV, and solar battery setups.

Giandel recommends a 200Ah or larger battery system to help the inverter run longer and handle heavier connected loads more steadily. The aluminum alloy housing adds physical protection, while the high-speed cooling fan helps reduce heat during longer use.

For users comparing value and output strength, the used 2200W power inverter offers tested pure sine wave performance, hardwire capacity, low distortion, and remote operation. It suits RV power, home backup, garage equipment, and appliances that need more headroom than a smaller inverter provides.

SPECIFICATIONS:

• Power: 2200watts rating power
• Output Wave: Pure Sine Wave
• Input Voltage: 9.8-16VDC
• Output Voltage: 120VAC±10%
• USB:DC5V 2.4A
• Standby current: 2 amps
• Efficiency: up to 91%
• THD≤3%
• LED Display: Shows battery voltage,output power,protection modes.
• Remote Controller with 15ft cables
• Built-in intelligent cooling fan: Will run automatically when the temperature reaches 104℉ or load power is more than 40% of rated power.
• Over-temperature Protection: Around 149℉
• Over-voltage Shutdown: 16V±0.5VDC
• Under-voltage Alarm: 9.8V±0.5VDC
• Under-voltage Shutdown: 9.5V±0.5VDC
• Over load protection: 2200W-2500W

ATTENTION:

• Connect the inverter to a 12V battery with the standard cables provided with product, and plug your AC devices into the inverter.
• Please do not leave the power inverter in the ON position while your car is off.
• Disconnect the positive battery terminal before doing any wiring to the inverter.
• Do not put the inverter into sunlight directly, keep it in cool and dry environment.
• Don’t use the inverter with a product that draws a higher wattage the inverter can provide, as this may cause damage to the inverter and product.