Product Overview:
Giandel PS-2200KAR is a high-performance 2200W Pure Sine Wave Inverter designed for heavy-duty applications. This pure sine wave inverter has been approved by ETL with UL 458 standard. It converts 12V DC battery power to stable 120V 60Hz AC, same as household grid power.Which is ideal to install in RVs, Vessels,Off Grid Solar system for water pump,air conditioner, hair dryer, microwave,air compressor and other sensitive high startup power equipments.
Key Features:
【Pure Sine Wave Power Inverter】This Power inverter provides 2200 watt true pure sine wave DC 12 Volt to AC 120 volt continuous power, coming with 2 AC outlets and 1x2.4A USB port.More powerful than 2000Watt power inverter.Ideal for appliances under 2200Watt. ETL listed with UL458 standard.
【Remote Control&LED Display】Inverter with Remote Control: cable length 15ft,the long cable will help you control the inverter ON/OFF easily.With a LED display easily to watch the input voltage,output power and protection modes.
【Safe to USE】Isolated Input/Output Design and Soft start tech, Over voltage, Low voltage, Overload, Short circuit, Over heat, polarity reverse protection(fuse). ETL listed comply with UL458 standard.
【Heavy Duty】The 20 Amps hard wire terminal blocks will ease this inverter provide 2200Watt continous power for heavy duty appliances. To ensure the inverter works and lasts longer, 200 AH or above batteries recommended.
【LOW THD】This pure sine wave inverter's THD is only 3%, which makes it has more stable performance and works smoothly suitable for appliances under 2200 watt.
【3 YEARS WARRANTY】Ideal Aluminum alloy housing with high speed Intelligent cooling fan helps reduce heat and prolong its life, better than plastic materials. 36-Months Warranty by GIANDEL
Note: Dimensions:15.9 x 9.1 x 3.7 in
The product is priced in US dollars, For orders in Canada, please refer to the bank's actual exchange rate.
Technical Specifications:
|
Model
|
PS-2200KAR
|
|
Waveform
|
Pure Sine Wave
|
|
Continuous Power
|
2200W
|
|
Surge Power
|
4400W
|
|
DC Input
|
12V DC
|
|
AC Output
|
120V AC 60Hz
|
|
USB
|
DC5V 2.4A
|
|
THD
|
≤3%
|
|
Efficiency
|
>92%
|
|
Nominal input voltage
|
9.8--16V DC
|
|
Nominal output voltage
|
120VAC±10%
|
|
Standby Current
|
2 amps
|
|
Over-voltage Shutdown
|
16V±0.5VDC
|
|
Under-voltage Alarm
|
9.8V±0.5VDC
|
|
Under-voltage Shutdown
|
5V±0.5VDC
|
|
LED Display
|
Shows battery voltage,output power,protection modes.
|
|
Low input Voltage Alarm
|
9.8V+/-0.5V (The alarm will remind users to recharge the batteries intime)
|
|
Low input Voltage Protection
|
9.5V +/-0.5V (Inverter screen shows "LO" code and beeps continuously )
|
|
Short Circuit Protection
|
If the load short circuited,the inverter will show "OL" code
|
|
Over Load Protection
|
Inverter screen shows "OL " code if load exceeds 2201-2400 watt
|
|
High Input Voltage protection
|
16V+/- 0.5V (Inverter stops working and gives "HI" code)
|
|
Over heat protection
|
65±5℃ (149℉)
|
ATTENTION:
Connect the inverter to a 12V battery with the standard cables provided with product, and plug your AC devices into the inverter.
Please do not leave the power inverter in the ON position while your car is off.
Disconnect the positive battery terminal before doing any wiring to the inverter.
Do not put the inverter into sunlight directly, keep it in cool and dry environment.
Don’t use the inverter with a product that draws a higher wattage the inverter can provide, as this may cause damage to the inverter and product.
Package List & Warranty
1x 2200watt Sine wave Power Inverter
2x Battery Cables (black and red)
1x Remote Controller
1x User Manual
36 Months Official Warranty
Frequently Asked Questions about PS-2200KAR
Q1: What voltage does this inverter output?
A1: Standard 120V 60Hz AC output, designed for United States household appliances.
Q2: Is the PS-2200KAR inverter certified for the US market?
A2: Yes, it is ETL listed to UL 458 standard , fully compliant for use and sale in the United States.
Q3:What size battery bank do I need for a 2200W inverter?
A3:For optimal performance, we recommend a minimum 12V 200Ah Lead-Acid or 100Ah Lithium (LiFePO4) battery bank to support heavy loads at 2200 watts.